ic卡智能水表電池怎樣拆卸大神支招

　　裁開充電電池倉鉛封，卸掉固定不動艙蓋的螺釘，取下充電電池，充電電池倉在智能水表底邊。

　　Cut the lead seal of the battery compartment, remove the screw fixing the compartment cover, and take out the battery. The battery compartment is at the bottom of the water meter.

　　輕按鎖扣，拔開連接頭，斷掉充電電池鎖扣聯接。智能水表應用的為二節3V鋰電，充電電池與智能水表由鎖扣聯接。

　　Press the buckle, disconnect the connector and disconnect the battery buckle. The water meter uses two 3V lithium batteries, which are connected with the water meter by a buckle.

　　新充電電池購到后，留意正負是不是與原來充電電池同樣，關鍵看電極連接線。如恰當準確無誤，將鎖扣與智能水表鎖扣接插就能。

　　After the new battery is purchased, pay attention to whether the positive and negative poles are the same as the original battery, mainly depending on the connecting wire. If it is correct, insert the buckle and the water meter buckle.

　　卡智能水表電池怎么更換

　　How to replace the battery of card smart water meter

　　這時不心急蓋上充電電池艙蓋，先加自己水卡插進智能水表，插進后智能水表繼電器姿勢，屏幕上顯示有關大數字，證實充電電池工作中一切正常，智能水表能夠工作中。留意：智能水表中將會存在小量的流水出。

　　At this time, do not rush to cover the battery compartment cover. First insert the water meter with your own water card. After inserting, the electromagnetic valve of the water meter acts and the screen displays relevant figures to prove that the battery is working normally and the water meter can work. Note: a small amount of water may flow out of the water meter.

　　蓋上充電電池艙蓋，極好固定不動螺釘，如智能水表早已換掉，通電話讓物業管理工作人員拆換智能水表就能。

　　Cover the battery compartment cover and fix the fixing screws. If the water meter has been replaced, call the property management personnel to replace the water meter.

　　這兒必須留意的是，遠傳水表充電電池的拆換有的智能水表自身是可以換的，而有些是必須生產廠家拆換的。假如自身不可以拆換立即聯絡負責人，防止危害智能水表一切正常應用。

　　It should be noted that some water meters can be replaced by themselves, while others need to be replaced by manufacturers. If you can't replace it, contact the relevant person in charge directly to avoid affecting the normal use of the water meter.